1 Year Warranty L2972mm Vacuum Hollow Paddle Dryer For Caustic Soda Powder

Caustic Soda Powder Vacuum Paddle Drying Equipment of China brand according to the Customer design

Product

Wedge-shaped blades with self-cleaning heat transfer surfaces. Wedge-shaped surface particles and scrubbing effect relative movement, to wash away the wedge surface material attachments, so in operation have maintained a clean heat transfer surfaces .blade dryer for the w-type shell, the shell of the general arrangements for 2-4 hollow stirring shafts. Shell with a sealed cover with the cover to prevent dust leakage and collection of materials, solvent vapor materials.

Set out and exit pull a block, to ensure a high degree of material level, so that heat transfer surface is covered with fully materials. Heat medium through the rotary joint, passing through the shell jacket and the hollow stirring shaft, hollow shaft stirring according to the type of thermal media have different internal structures to ensure the best heat transfer.

1. Air Filter: In pneumatic technology, air filter, pressure-reducing valve and oil mist are called pneumatic three large parts.In order to get a variety of functions, these three gas source processing elements are assembled in order, called pneumatic triplets.Used for air source purification filtration, decompression and lubrication.In pneumatic technology, air filter, pressure-reducing valve and oil mist are called pneumatic three large parts.In order to get a variety of functions, these three gas source processing elements are assembled in order, called pneumatic triplets.Used for air source purification filtration, decompression and lubrication.

2. Heat Sink: The heat sink material is the specific material used in the radiator.The thermal conductivity of each material is different, ranging from high to low in thermal conductivity, respectively silver, copper, aluminum and steel. But if silver is used for cooling, the best solution is to use copper.Although aluminum is much cheaper, it is clear that the thermal conductivity is not as good as copper (about 50 percent of copper).The common heat sink material is copper and aluminum alloy, both have their advantages and disadvantages.

3. Dust Collector: (1). The dust collector is divided into three categories according to its operating principle as filter dust remover, electrostatic precipitator and magnetic dust collector. (2). The dust collector is divided into dry scrubber, semi-dry scrubber and wet dust collector. In the industry, more and more are the electric bag compound dust collector and bag type dust collector (the fabric filter).

4. Draught Fan: The main structural parts of the draught fan are impeller, casing, inlet, bracket, motor, pulley, coupling, muffler, transmission (bearing), etc.

Technical parameters

Application

This dryer is widly used in pharmaceutical industry, foodstuff industry, chemical industry and etc. Especially be sutiable for the following materials:
1. Pulpiness, paste-like mixture or powder materials.
2. Thermal sensitive material which required to be dried at lower temperature.
3. Material that are easy to oxidize or explode and the material that have strong irritative or toxic.
4. Material that required recoverying solvet.

Features

FAQ

Q1. What is the advantage about your company? A1. Our company has professional team and professional production line.

Q2. Why should I choose your products? A2. Our products are high quality and low price.

Q3. Any other good service your company can provide? A3. Yes,we can provide good after-sale and fast delivery.