Stainless Steel 4layers Cylindrical Vacuum Drying Machine For Food 250-3200kg

YZG/FZG Series Automatic Cylindrical Vacuum Drying Equipment For Food

PRODUCT SHOW

Pure water has a maximum speed at which vaporization Boiling state. Under normal conditions, about 100 ℃ when the water began to Boiling. And in vacuum conditions, due to the system of water vapor partial pressure of water vapor partial pressure far below the surface of the material, the boiling point of water is less than 100 ℃. For example: the surface down to -0.07MPa, water starts at 70 ℃ Boiling. So, although at a lower operating temperature of the dryer is still a large drying capacity.

Principle

Vacuum drying is to put raw material under the state of vacuum for heating and drying. If use vacuum to pump air and humidity out, the dry speed will be faster.

Note: if use condenser, the solvent in raw material can be recovered. If the solvent is water, condenser might be canceled and the investment and every could be saved. it use SK series water ring vacuum pump sets, condensate can not be used and the investment could be saved .

Features

1) can get a higher rate of drying at lower temperatures, the heat of the full.
2) suitable for low-temperature drying, drying heat-sensitive materials, the fear of an oxide material drying.
3) Drying can contain solvents and solvent to be recovered materials.
4) can be disinfected before drying process, drying process without any impurities mixed.
5) This dryer is a static vacuum dryer, so the shape of the dried material will not be damaged.
6) This dryer is a batch production equipment, ready to adjust the process.
7) inside the top of the arch, can effectively avoid the anti-condensate drip phenomenon.
8) four-point-one vacuum pump structure to ensure uniformity of dried material.

Technical parameters

Note: The above data is for reference only. If having special requirements, the factory can provide the service of consultation and design.

Sale service:
(1). Ensure product with high quality and pre-commissioning before delivery. (2). Delivery on time. (3). Provide full set of documents as customer’s requirements.

After-sale service:
Provide considerate services to minimize clients’ worries.
1. Assist clients to prepare for the first construction scheme.
2. Install and debug the equipment.
3. Train the first-line operators.
4. Examine the equipment.
5. Take initiative to eliminate the troubles rapidly.
6. Provide technical support.
7. Establish long-term and friendly relationship.

Service commitment:
1. Provide clients one-year warranty to make sure the machine work well.

2. We always keep certain inventory level of spare parts, which means the replacements can be sent to you timely.

3. Send every client a preferential quotation.