Product Details
Place of Origin: China
Brand Name: JingSu ShengMan
Certification: CE and ISO9001
Model Number: HZG
Payment & Shipping Terms
Minimum Order Quantity: 1set
Price: USD30,000-USD300,000
Packaging Details: Plywood Cases
Delivery Time: 60-90days
Payment Terms: L/C, T/T
Supply Ability: 10sets
Application: |
Amylaceum/glucose/dextrose |
Voltage: |
220v/380v |
Warranty: |
1 Year |
Color: |
Customer's Request |
Heating Source: |
Steam, Electric |
Condition: |
100% NEW |
Weight: |
2.9-104.9t |
Material: |
SUS304, SUS304 |
Capacity: |
0.5--10 Tons Per Hour |
Installation: |
Engineer Guidance Installation |
Revolution: |
2-7r/min |
Application: |
Amylaceum/glucose/dextrose |
Voltage: |
220v/380v |
Warranty: |
1 Year |
Color: |
Customer's Request |
Heating Source: |
Steam, Electric |
Condition: |
100% NEW |
Weight: |
2.9-104.9t |
Material: |
SUS304, SUS304 |
Capacity: |
0.5--10 Tons Per Hour |
Installation: |
Engineer Guidance Installation |
Revolution: |
2-7r/min |
Customizable HZG High Efficiency Continuous Rotary Drum Dryer for amylaceum/glucose/dextrose
Work Principle
Rotary Drum Drier is a kind of dryer with rotating cylinder body which is a little bit incline. The wet material is loaded from
one end from the screw material adding device continuously, and is stirred by the bafflers that are uniformly distributed in the barrel.The material is uniformly distributed and dispersed in the dryer and fully contacts the hot air of counter flow. When the material passing through the cylinder inside surface, it will contact with the hot air circling inside and being dried .Most of the dried product will be discharged from the other end of the dryer. Small part of the fine granule goes into the cyclone separator with the exhaust air. The powder will be separated and collected, and the exhausted air will be ejected to the atmosphere. During the drying course, the material will slowly move to the lower end from the higher part recur to the slowness rotating of the cylinder
Technical parameters
| raw material | ore | vesicant | slag of blast furnace | coal |
| amount to be treated (kg/h) | 1000 | 466 | 15000 | 5000 |
| primary moisture(%) | 30 | 13 | 6 | 6.5 |
|
final moisture (%) |
15 | 0.3 | 1 | 0.1 |
| average diameter(mm) | 6.5 | 0.05 | 4.7 | 5 |
| amount of hot air(m³/kg) | 39000 | 5400 | 10750 | 16000 |
| temp of air at inlet (℃) | 600 | 165 | 500 | 570 |
| temp of material at outlet(℃5) | 42 | 100 | 75 | |
| way of heating | gas | electric | heavy oil | heavy oil |
| revolution (r.p.m) | 4 | 4 | 3.5 | 2 |
| length of dryer | 20 | 12 | 17 | 16 |
Application
This dryer widely used in the following industries:
- Drying large particles and heavy material for chemical, mining, metallurgy and other industries, such as: mining, blast furnace slag, coal, metal powder, fertilizer, ammonium sulfate.
- Drying powder or granular materials which have special requirements, such as: HP vesicant, lees residue, precipitated calcium carbonate, activated clay, magnetic powder, graphite, dregs.
- Drying the material which required low-temperature and continuous drying process.
Working process:
Rotary dryer adopts direct flow type of heating with heat soure from firing unit. The material to be dried is pushed back immindiately by spiral board when enters the shell from feeding tank and feeding chute. Because the drier is installed in slope, material flows to the back end under gravity and rotation force, meanwhile, it is lifted by board repeatedly and thrown down accordingly, which make the material form even curtain, and exchange heat sufficiently with inner the heat flow. In the end, water in the material is dried by repeatedly scattering.
Our services
We have a professional engineer team responsible for the pre sales technical consultation, technical solution in the process of sales, installatin, commissioning and after sales service for customers. Every year, we will send engineers to our overseas customer site to help customers inspect and maintain the equipment.
FAQ
Q1: Are you trading company or manufacturer?
A: We are factory.
Q2: How long is your delivery time?
A: Generally it is 7-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
Q3: What is your payment method?
A: 30% of total price should be paid by T/T as down payment; 70% balance payment should be paid by T/T before delivery.
Q4: What Information should customers give us, So that we can be able to provide you suitable quotation and service.
What minerals are you separating?
What's the maximum size of your raw minerals?
How much capacity do you need per hour for your project?
